Disclaimer
The BPF Pipes Group is the Trade Association of the UK plastic piping systems industry. Member companies manufacture and supply plastic piping systems and provide supporting services. Product information published by the BPF Pipes Group has been developed and agreed by BPF Pipes Group members and is relevant generic information that is normally common to products placed on the UK market.
In accordance with the BPF Pipes Group charter, BPF Pipes Group members place products on the UK market that are suitable for the intended UK applications and conditions. Also in accordance with the BPF Pipes Group charter, members endeavour to ensure that products placed on the UK market meet the requirements of relevant product standards, verified by relevant third party certification, where such standards and third party schemes exist.
BPF Pipes Group members should be contacted for any additional product information specific to brands, ranges, systems or items - information such as the intended UK applications and conditions, and available valid product certification.
Product information published by the BPF Pipes Group is intended to be clear, accurate, unambiguous, up-to-date and accessible, developed using processes and procedures that are aligned with the Code for Construction Product information (CCPI). However, before using any product information published by the BPF Pipes Group (or other sources), users should consider the relevance and accuracy of the information e.g. source, scope, adequacy, version. Members of the BPF Pipes Group accept no liability arising from any errors with this product information.
Users of product information should also consider any relevant current UK product regulation that may be applicable including any responsibilities under such regulation.
Cold Water Services
These results cover pipes and fittings above DN100 size for cold water supply within buildings, for use up to a maximum operating pressure of 10 bar. This includes:
Direct mains-fed pipework
Supplies cold water directly from the incoming mains, before any cistern or gravity tank. The minimum water supply pressure is 0.7 bar (water service provider legally requirement).
Boosted tank-fed pipework
Supplies cold (ambient) water from a booster pump that is fed by a cistern or gravity tank, pressure boosted cold water where the mains pressure is insufficient.
Gravity tank-fed pipework
Supplies cold (ambient) water that is fed by gravity from a storage tank, where low pressure cold water is sufficient.
Potable water
Water suitable for human consumption that meets minimum legal requirements for wholesome water from mains or private extraction.
PB (Polybutylene)
PE-X (Cross-linked Polyethylene)
PE-RT (Polyethylene of raised temperature resistance)
PP (Polypropylene)
PVC-C (Chlorinated Polyvinyl Chloride)
MLCP (Multilayer Composite including an aluminium layer)
BS EN ISO 15874: PP
BS EN ISO 15875: PE-X
BS EN ISO 15876: PB
BS EN ISO 15877: PVC-C
BS EN ISO 21003: MLCP
BS EN ISO 22391: PE-RT
Check the standard for the application class (and other information). Manufacturers provide information confirming the application classes of products in product literature and on the product.
Pipes and fittings must be suitable for use with potable water and be UK Reg 4 compliant.
Please ensure when choosing polymer products for pipework, that polymer pipes and fittings intended to be used together, are of the same material and meet the requirements of the same standard.
When contacting a manufacturer, please advise that the pipe selector tool has been used.
MEMBERS AREA
